FX2N PLC electronic cam resolver
Image representative of range only
RS Stock No.
Mfr Part No.
Still not found what you are looking for?
Not found what you are looking for? You can find products which may be more suitable
by simply checking the features that interest you above and clicking the Find button.
Electronic Cam Resolver Kit
An electronic cam switch which can be used as a stand alone unit, or up to 3 can be used with an FX2N PLC.
Kit contains a solid state cam switch module with a setting panel, brushless resolver, 5m interconnection cable and manual
Typical applications include control of shaft rotation, cam or rotary table positioning in automated assembly, textile and packaging machines
48 Channels, (32 max. at any one time) each with 8 on/off points/revolution
Control resolution 720 divisions/rotation (0.5°) or 360 divisions/rotation (1°)
Response speed 415rpm/0.5° or 830 rpm/1°
Max machine speed 3000 rpm to allow for machine speed over runs
Cable between resolver and module can be extended up to 100m
Operating angle adjustment may be undertaken using either the setting panel, or by FROM/TO instructions from the PLC
Módulos adicionales para autómatas programables Mitsubishi FX1S, FX1N y FX2N
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
Todos los productos siguientes, excepto el cable alargador, se conectan directamente al extremo derecho de la unidad, bloque o módulo anterior con el cable integral corto.